EN 
English
Español
Air intake filters play a vital role in industrial and commercial applications, helping to ensure equipment performance and air quality. However, long-term use and environmental factors may cause air intake filters to be affected by dirt and blockage, thereby reducing their filtration efficiency and affecting the normal operation of the equipment.
Dirt and blockage are one of the common problems of air intake filters, mainly due to the long-term adsorption and filtration of dust, dirt and other particles in the air by the filter. These dirt and particles will gradually accumulate on the surface of the filter, causing the vents to be blocked, which in turn affects the air flow and filtration efficiency.
In order to solve the problem of dirt and blockage of air intake filters, here are some professional methods and suggestions:
- Clean the filter regularly: Regularly use a special filter cleaner or warm water and neutral detergent to gently clean the filter surface, which can effectively remove dirt and particles and restore ventilation performance.
- Replace the filter: If the filter dirt and blockage cannot be cleaned and restored, you need to consider replacing the filter, choose the appropriate specifications and type, and replace it regularly to ensure the normal operation of the equipment and air quality.
- Check the air inlet position: Check whether the inlet position is appropriate to avoid direct inhalation of dust and dirt on the ground. Consider adding a protective cover or changing the air inlet position.
- Use a pre-filter: In a particularly dusty or polluted environment, installing a pre-filter can reduce the load on the air intake filter, effectively remove large particles and dirt, and extend the service life.
- Check the sealing performance: Ensure that the seal between the installation position is intact to avoid air bypassing and directly entering the system. Regular inspection and replacement of seals can effectively prevent the intrusion of dirt and particles.
